With the development of science and technology, the traditional feeding equipment has been unable to meet the operating requirements of the injection molding workshop. Since the central feeding system can change the combination of multi-color materials and raw material varieties according to the needs and can realize the automation of the coloring process Feeding equipment, and can improve work efficiency, saving time for feeding. The central feed system is widely used in injection molding shops due to its many advantages. So we all know what is the central feeding system? Here by Hengrong mechanical professionals to introduce to you.
Central feed system introduction:
The alias of the central feed system are: centralized feeding system, automatic feeding system. It is designed for the production of plastic products in the injection molding shop. It uses microcomputer centralized automatic control, which can regenerate and use the nozzle cold material in a fully automatic manner. It can control all the feeding equipment and prevent the blockage in the storage silo Occurred by setting the central monitoring station to achieve full automation, to achieve a continuous feed of pellets for 24 hours.
Central feed system works:
1, using vacuum transmission, there is no centralized pipeline system will be plastic raw materials from the storage tank quickly transported to the central dehumidification drying system, and then the dried raw material delivered to each injection molding machine. Simply put, the central feeding system adopts the design method of "one machine and one tube" to prevent the resurgence of the raw materials after dehumidification and drying and ensure the air of the whole system to feed the raw materials.
2, the central feed system with the central dehumidification drying system, the use of desiccant can be sent after the drying cycle will be cleaned to ensure that there is no residual pellets in the pipeline, can be a good raw material to avoid the phenomenon of resurgence, but also to ensure To join the injection molding machine in the same performance of raw materials. Under the action of vacuum negative pressure, the raw dust in the raw material is filtered out through the dust filtration system, which is greatly helpful for improving the quality of the molded product. In addition, the central feed system in each transport line is stable, no blocking phenomenon occurred.
About what is the central feeding system for everyone to share here today, the central feeding system to implement a high degree of automation and control, monitoring, etc., which can maintain a clean production workshop and improve the efficiency of feeding material for the injection molding shop Create a special equipment!
